Fork Mounted Loadlifter

Loadlifter is specifically designed for the safe loading and unloading of roll cages onto and from articulated vehicles.

STANDARD FEATURES

·         Lowerable ladder for safe access for personnel

·         Rubber buffered wings to limit entry into rear of vehicle

·         Retention rope to minimize cage movement

·         Maximum fork section 100 x 45 mm at 1000 mm centres

·         Painted bright orange for safety

OPERATION

·         The product must be positioned on level ground.

·         Position the forks to the correct distance apart to locate into fork pockets.

·         Drive forks fully into fork pockets.

·         Unlatch the safety chains and re-couple to keep bracket.

·         Load the load lifter with 2 or 3 cages (dependent upon type of cage).

·         Re-attach the safety chains.

·         Lift the load lifter so that the two retaining brackets (Yellow in colour) fully engage with the forklift carriage.

·         Apply required back tilt of the forklift mast.

·         Proceed to the open lorry approaching square on and not angular.

·         Lift the Load lifter above the lorry bed height and proceed forward into the lorry so that the side handrails are within the sides of the lorry.

·         Realign forklift mast to the vertical position and lower onto the lorry bed ensuring that the retaining brackets are still engaged to the forklift carriage.

·         Unlatch the safety chains and re-couple to keep bracket and remove the cages

                                                                              **************************

Carriage Is Extra On This Product Depending On Weight And Delivery Postcode  – Please call for quotation including offshore postcodes 0800 0141664

                                                                              ***************************